If you need unlock all altice S14, the solution is Nck
How unlock altice S14 by nck_?
1) open nck mtk module
2) Click SIMLOCK UNLOCK
3)choose Altice--->S11
4) Click direct unlock
the phone must be off with volume + pressed.
unlock altice s14 done free
Lookat this Log
Exe version: NCKDongle AndroidMTK 2.7.7
Selected model: Altice S11
Action: Unlock
Phone must be off with battery inside.
Battery must be charged
Please insert USB cable now...
For some phones need to keep "VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+" button untill inserting USB cable.
Detected(10) : MediaTek USB Port (COM10)
[10] \\?\usb#vid_0e8d&pid_0003#5&826c637&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Boot mode: Brom
BBCHIP: 6580 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
[emmi]EMMC CID: 700100454838454538
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : 05
BaseBand CPU Bootloader Version : FE
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) KSI 0x454838454538
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 700100454838454538 : 00000000000000
EMMC UA SIZE: 0x1d2800000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d3400000 [7.301 GB]
Status: USB_FULL_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected(30) : MediaTek DA USB VCOM (Android) (COM30)
[30] \\?\usb#vid_0e8d&pid_2001#5&826c637&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Phone have OTP partition.
OTP IMEI: 356781320143642
Reading security, wait...
SIM[1]:
Block1(N): Locked (remain:255) Code : 12345678
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
SIM[2]:
Block1(N): Locked (remain:212) Code : 12345678
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
[2060]Unlocking target...please wait
[0]Unlock finished.
[1]Unlock finished.
CHK updated ok.
Ajouter un commentaire ici